MANUFACTURING WORKER
1057A ADVANCED PORTABLE LADDER SAFETY
Little can be more frightening as plummet to the ground from a ladder, but it happens more than you can imagine. But as they say, it's not the fall that kills you, it's the sudden stop! No matter what type of ladder you use or what you use it for, it pays to take the time to read the instructions and the learn basic ladder safety. This program talks about ladder safety, choosing the right ladder for the job, climbing the ladder, and what to do if you fall off of a ladder. (11 Min)
1001AE EMPLOYEE SAFETY ORIENTATION
Meets OSHA requirements for training all employees who are exposed to "General Hazards." Includes basic requirements, electrical, mechanical, back injury prevention, fire prevention, fire protection, personal protective equipment, and more. (14 Min.)
1042AE HAZARD COMMUNICATION - THE NEW MILLENNIUM (Short Version)
This short version of HAZCOM provides updated training in the areas of MSDS, labeling, physical and health hazards, and information generally required for employee training. This version does not elaborate on the written plan as most employees are not concerned with developing the written manual, only knowing one exists that can be reviewed as necessary. This is the short version. (17 MIN)
1002A MSDS FOR HAZARDOUS COMMUNICATIONS
Meets OSHA requirements for training employees who use chemicals/hazardous materials in the workplace. Describes Material Safety Data Sheets (MSDS), labeling, and basic safety when using these materials. (18 Min.)
1040AE ORIENTATION 2000
Includes the topics: employee safety responsibility, PPE, BBP, safe lifting, sanitation and personal hygiene, electrical safety, machines and equipment and ergonomics.
ORIENTATION 2000 Package (Individual Videos)
1027AE REPORTING FOR WORK - YOUR SAFETY RESPONSIBILITIES
Designed to educate employees of their responsibilities for reporting to work in proper clothing and proper safety attitudes. General orientation to safety basics that can be used to supplement your safety orientation program for new employees as well as awareness for experienced employees. (9 MIN)
1044AE SHIFTWORK FATIGUE
More than 68 percent of all shift workers complain of lack of sleep and fatigue. This excellent training program is for those employees who work on swing, graveyard, and/or changing shifts. Developed with assistance from the Department of Transportation (DOT) research. Designed to explain the necessity for sleep, repayment of sleep debt, how circadian rhythms work, and what people can do to reduce the effects of shift work fatigue due to disruption of sleep cycles. (15MIN)
1051AE STOPPING ERGONOMICS INJURIES
This program is designed for both manufacturing and office environments, as it explains the methodology of developing an effective Ergonomic Safety Program and what employees and management can do to stop or prevent ergonomic injuries. (12MIN)
1050AE THE NEW LOCKOUT/TAGOUT PROGRAM
This updated version of Lockout/Tagout is designed as a refresher for both Affected and Authorized personnel. The new ANSI Standard (released in 2003) on Lockout/Tagout is discussed by Dr. Perry Huckabay, Risk Management Consultant and formerly the Director of the Texas Worker Compensation Commission. Perry outlines the changes and additions to the Lockout/Tagout standards which may affect companies who are required to comply with this safety standard. (17 MIN)
1058AE WALKWAYS, LADDERS, AND ELEVATIONS - DON'T SLIP AND FALL
There has been so much information about slips, trips, and falls that many people are no longer paying attention. Slips and falls were the major causes of injuries in the early days of safety. There are cases where people were deliberately pushed down stairs. There have been a wide range of accidents in the workplace from every conceivable cause. Even includes running into doors or doors running into people. Jumping from elevated surfaces has caused quite a few injuries. (12 MIN)
1056AE WORKING SAFELY WITH COMPRESSED AIR
This video is designed to teach you about the hazards of working with compressed air and compressed air powered tools. This video includes working with tools, using compressed air in the workplace, and proper protection when working with compressed air. This video even goes into a few incidences when people were reported to be hurt by not being careful or playing with compressed air. (16 MIN)
